Our products
our products
Our range caters to the requirements of various Project owners, Engineering Institutes, Technical Consultants, Test & Research laboratories, Universities and Civil Contractors.
G01-001 – Soil Colour Chart
G01-001 – Soil Colour Chart
Soil colour charts are used by geotechnical engineers, soil scientists and agricultural engineers for the determination of soil color for further gradation of soil on colour basis. Soil Colour Chart consists of 7 sheets having total 196 colour strips. These colour strips are original high quality Munshell colour strips, remains constant throughout life.
G01-010 – Core Cutter Apparatus
G01-010 – Core Cutter Apparatus
Core cutter is used for determining the in-situ dry density of soil. In this test a known volume core cutter is driven into soil by a rammer. Core cutter is than removed and dried for moisture and density check.
G01-012 – Sand Pouring Cylinder
G01-012 – Sand Pouring Cylinder
Sand Pouring Cylinder or Sand Replacement Apparatus is used for the determination of in-situ dry density of soil. In this test, soil is extracted from test are and sand of known density is filled into extracted area. Extracted soil is than dried and measured for moisture and density.
G01-020 – Soil Auger
G01-020 – Soil Auger
Augers are used for making borehole in ground. These are constructed of heavy gauge steel sheet and rod. A T handle is provided to enable the operated rotate the auger.
G01-024 – Soil Sampling Outfit, Heavy Dut
G01-024 – Soil Sampling Outfit, Heavy Duty
Soil sampling kit consists of everything that a field engineer might require for onsite sample collection. In heavy duty kit we have included (1) Soil Auger 150mm with Extension rod and Handle (2) Extension Rod with suitable connector, 4 nos. (3) set of spanner for opening of the augers (4) Jarring Link for driving sampling tube (5) Sail Sampling Tube 38mm dia x
G01-040 – Standard Penetration Test Apparatus
G01-040 – Standard Penetration Test Apparatus
Standard Penetration Test is done using split spoon sample, to collect UD sample for testing and obtain resistance to penetration of soil, that can be related to unconfined compression strength. In this test a 65 kg weight is dropped and number of blows required for 30 cm penetration is recorded.
G01-042 – Dynamic Cone Penetrometer Apparatus
G01-042 – Dynamic Cone Penetrometer Apparatus
Dynamic Cone Penetrometer requires a 60 degree cone that is penetrated into ground using 65 kg weight. Number of blows required for the penetration of cone is recorded. Often while using SPT, split spoon sampler is removed and cone is fitted in same system.
G01-044 – Dynamic Cone Penetrometer, Highways/Pavement
G01-044 – Dynamic Cone Penetrometer, Highways/Pavement
This is latest development and as per the basic design by TRRL-UK. In this test a 8 kg weight is dropped and number of blows required for the penetration of 60 degree cone is recorded.
G01-001 G01-045 – Static Cone Penetrometer
G01-045 – Static Cone Penetrometer
Static Cone Penetrometer requires a 60 degree steel cone that is forced vertically by static thrust required to cause a bearing capacity failure of the soil on surrounding soil. Readings at regular depth intervals are taken to get a bearing profile and hence a shear strength profile is generated.
G01-050 – Field Vane Shear apparatus
G01-050 – Field Vane Shear apparatus
Field Vane Shear Test is done at the base of any borehole to find in place shearing resistance of soil. A torque indicator indicates the resistance produced by a vane that is being rotated by a gear wheel based force mechanism.
G01-055 – Sample Extractor
G01-055 – Sample Extractor
Sample extractors are used for extracting soil mass from sampling tube or moulds. Various sample extractors are available, including screw type or hydraulic jack type. Motorized sample extractors are also available for ease in working as thy won’t need any manual force and instead a motorized pump will pressurize hydraulic jack.
G01-060 – Soil Lathe
G01-060 – Soil Lathe
Soil lathe is used for preparing sample from large soil mass to smaller size, suitable for tri-axial or unconfined compression testing.
G01-065 – Plate Load Test apparatus
G01-065 – Plate Load Test apparatus
Plate Load Test is ideal test done on foundations and gives stress/strain characteristics to determine the ultimate bearing capacity of soil foundation. In this test steel plate equals to foundation width is placed at foundation level. A jack is placed on plate and loaded to find load and displacement on soil under test.
G01-066 – Load Truss
G01-066 – Load Truss
Load truss or Reaction Beam is a welded I-beam two halves construction required for completing the plate load test. This is easy, quick loading system replacing old dead weight technique, having girders and sand bags. Load truss is provided complete with anchorage and spikes.
G01-071 – Portable Plate Load Test 100 kN
G01-071 – Portable Plate Load Test 100 kN
In this modern Soil Bearing Capacity Test, a loaded truck or heavy object may be used to provide reaction force. All parts to be used in the test are lightweight for easy transportation to the test site.
G01-074 – Remote Digital Displacement Indicator
G01-074 – Remote Digital Displacement Indicator
Forget the days, when you used to enter below test pits to measure the deformation during PLT (plate load test or pile load test). Unlike old dial indicator system, this system uses digital sensors, signal cable and digital indicator. Easy to use, highly accurate, stable results, long term use are main feature of the system.
G01-110 – Cone Penetrometer for soil
G01-110 – Cone Penetrometer for soil
The relationship of soil moisture with penetration of a cone is used to find the liquid limit of soil. In this a 31 degree cone of total 148 gram weight is penetrated 25mm into test sample to find liquid limit.
G01-120 – Plastic Limit Set
G01-120 – Plastic Limit Set
Plastic Limit is stated as the lowest moisture content of a soil that will permit a soil to be rolled into 3 mm thread. Equipment consists glass plate, 3 mm rod, moisture tins, measuring cylinder, mixing bowl and spatula
G01-130 – Pycnometer
G01-130 – Pycnometer
Specific gravity is the ratio of weight of sample in air and weight of equal volume of water. Pyconometer is used for the measurement of specific gravity of any clay, sand or other materials of less than 10mm.
G01-075 – CBR Test Apparatus Field
G01-075 – CBR Test Apparatus Field
Field CBR is used for the determination of in-situ penetration resistance of standard penetration piston, useful for finding loading capacity of ground. System is provided complete ready to use with loading jack, penetration piston, extension rod set, datum bar, metal weight, proving ring and dial indicator.
G01-085 – Pocket Penetrometer for UCS
G01-085 – Pocket Penetrometer for UCS
Pocket Penetrometer is used to estimate the approximate unconfined compressive strength and shear strength of soil. It is also used to classify cohesive soils on consistency. In this test, a stainless steel plunger is pushed into soil until maximum penetration mark is reached.
G01-090 – Vicksberg Proving Ring Penetrometer
G01-090 – Vicksberg Proving Ring Penetrometer
A 30 degree cone is pushed at constant rate into test ground such as shallow foundations, and penetration resistance is achieved, read on 1 kN proving ring. Given the chart load is achieved and load vs penetration curve may be prepared.
G01-100 – Liquid Limit Apparatus
G01-100 – Liquid Limit Apparatus
Liquid Limit Test on soil enables geotechnical engineer to correlate with mechanical properties of soils such as lower limit of shear strength and compressibility index of soil. Principal of the test is relationship between soil moisture in test cup and number of blows required to close the gap made by a grooving tool.
G01-125 – Shrinkage Limit Set
G01-125 – Shrinkage Limit Set
Shrinkage limit is state where further decrease in soil moisture will not cause a corresponding decrease in the volume of soil mass. Equipment consists of shrinkage dish, glass cup, plane plate, 3 prong plate, mixing bowl and spatula. Mercury required and may be procured.
G01-160 – Soil Hydrometer
G01-160 – Soil Hydrometer
Soil Hydrometer is used for the measurement of specific gravity of soil sample in gm/cm3. Soil hydrometer has measurement range from 0.995 to 1.038 gm/cm3. This is used with 1 liter glass jar having single marking.
G01-200 – Load Frame
G01-200 – Load Frame
Load Frames are used for providing compression load required for various tests including, CBR, UCS and Triaxial. Load is effected by mean of a lead screw, screw against rotation by sliding key. Load may be measured using a proving ring/load cell and movement using dial indicator/displacement sensor.
G01-250 – Proctor Compaction Apparatus
G01-250 – Proctor Compaction Apparatus
Compaction mould is essentially a steel mould having collar and base plate. A rammer is required for providing required compaction. This Test can provide the value of maximum dry density of any soil sample. This can also generate the relationship between dry density and moisture content for sample.
G01-270 – Laboratory CBR Test Apparatus
G01-270 – Laboratory CBR Test Apparatus
CBR or California Bearing Ratio Test was originally developed in California, USA for the estimation of bearing value of highway sub-bases and sub-grades. This test is performed using a penetration cone penetrating at fixed penetration rate and measuring load and penetration.
G01-285 – Unconfined Compression Tester
G01-285 – Unconfined Compression Tester
UCS or Unconfined compression Strength Test on soil is an axial compression test in which soil sample is provided with no lateral support while undergoing vertical compression. This is quick and simple test done mostly on cylindrical test of cohesive soils and usually indirectly related to shear strength which is taken as half of unconfined compression value.
G01-290 – Relative Density Apparatus complete
G01-290 – Relative Density Apparatus complete
Relative Density Test is done for the determination of the maximum dry density and water content of cohesionless materials when compacted using a vibrating table. This method applies to mixtures to be used in road construction. The standards also specify that it is used for the determination of the relative density of cohesionless soil for which impact compaction will not produce a well defined moisture-density relationship curve and where the maximum density of impact method will generally be less than by vibratory method.
G01-375 – Triaxial Test Apparatus
G01-375 – Triaxial Test Apparatus
Triaxial Shear Test is conducted over variety of soils. Basic system contains a Loading Frame to provide desired strain over sample, Triaxial Cell for keeping the sample and applying vertical load by mean of load frame and lateral pressure from Constant Pressure System. The strain over sample is measured at different loads by mean of a vertically moving arm through triaxial cell.
G01-400 – Direct Shear Test Apparatus
G01-400 – Direct Shear Test Apparatus
Direct Shear Test is done on square box, horizontally divided into two parts. The specimen contained in the centre of both boxes, is subjected to constant vertical force, while an increasing horizontal force is applied to one of the section of shear box. The force causes the sample to fail and create a relationship between shear stress and maximum stress.
G01-415 – Vane Shear Test Apparatus
G01-415 – Vane Shear Test Apparatus
Vane Shear Strength Test is done on very sensitive clays having shear strength of 20 kPa or less. In this test, a vane is inserted into test sample and rotated to know related shear strength.
G01-485 – Swell Permeability Test Apparatus
G01-485 – Swell Permeability Test Apparatus
Swell Permeability Test is done at known, density and moisture sample in soaked condition. The load applied to restrain the swelling is transferred to a load measuring device, through a perforated plate and load transfer bar.
G01-500 – Hydraulic Jack
G01-500 – Hydraulic Jack
Hydraulic jacks have various use in engineering. Mainly they are used for applying load on any surface. These jacks requires hose pipe, load indication unit and hydraulic pump.
G01-520 – Mash Cone Apparatus for Bentonite
G01-520 – Mash Cone Apparatus for Bentonite
Marsh cone are useful for finding the flow of drilling fluids such as bentonite. 4 mm and 100 mm orifice available for various field use, including convenient stand for holding the funnel.
G01-450 – Consolidation Test Apparatus
G01-450 – Consolidation Test Apparatus
Consolidation Test or Oedometer Test is done on soils for many years and generally known as one dimensional consolidation test. When a load such as that imposed by a structural foundation is placed on the ground, some settlement will occur even if the applied pressure is well within the safe bearing capacity of soil.
G01-475 – Permeability Apparatus for Soil
G01-475 – Permeability Apparatus for Soil
Permeability character-ship of soil is required for many construction projects where drainage is an important feature. Permeability is a major parameter used in the design and assessment of landfill sites and the investigation of contaminated grounds.
G01-510 – Hydraulic Pump for Jack
G01-510 – Hydraulic Pump for Jack
Hydraulic Pumps provided by us are spill proof i.e. oil wont leak in shifting or transportation and this make them ideal for field use. Our Jacks have double plunger, one meant for oil filling and another for pressuring. When starting using, first oil filling is done, and on oil filling pressure plunger comes into action, automatically, without shifting the handle.
G02-001 – Rock Color Chart
G02-001 – Rock Color Chart
Rock Color Chart helps geologists and archeologists communicate with color more effectively by cross-referencing color names with unique Munsell alpha-numeric color notations for rock color samples. The rock color chart is a revision of the Geological Society of America (GSA) Rock Color Chart.
G02-005 – Brunton Compass
G02-005 – Brunton Compass
A Brunton compass was originally developed by a Canadian geologist Mr. David W. Brunton, utilising magnetic induction damping rather than fluid. This may be used for accurate measurement of degree, angle and dip measurements. The most frequent use for the Brunton in the field is the calculation of the strike and dip ofgeological features such asfaults, contacts,foliation, sedimentary strata.
G02-010 – Geologists Hammer
G02-010 – Geologists Hammer
A Geologist’s Hammer, Rock Hammer, Rock Pick or Geological Pick is a hammer used for strength determination and splitting and breaking rocks. In field geology, they are used to obtain a fresh surface of a rock in order to determine its composition, nature,mineralogy, history and field estimate of rock strength. Infossil collecting and mineral collecting, they are employed to break rocks with the aim of revealing fossils inside. Geologist’s hammers are also sometimes used for scale in a photograph.
G02-015 – Geologists Magnifying Glass
G02-015 – Geologists Magnifying Glass
Geologists working in the field, lab or office often need to closely examine rocks, sediments, soils, sand, minerals and other materials with tiny features. A hand lens provides a quick and easy way to perform that work. Many field geologists use a pocket lens so frequently that they wear it on a lanyard or cord around their neck. Some tuck the lens into their button-down shirt pocket when not in use. This lens is a 10x-30x magnifier with a protective case.
G02-018 – Pocket GPS receiver
G02-018 – Pocket GPS receiver
The Global Positioning System (GPS) is a space-based satellite navigation system that provides location and time information in all weather conditions, anywhere on or near the earth where there is an unobstructed line of sight to four or more GPS satellites. The system provides critical capabilities to geolgists and civil engineers. It is maintained by the United States government and is freely accessible to anyone with a GPS receiver.
G-02-02 – Pocket Pedometer
G-02-02 – Pocket Pedometer
A Pedometer is a device, usually portable and electronic or electromechanical, that counts each step a person takes by detecting the motion of the person’s hips. Because the distance of each persons step varies, an informal calibration vs distance covered in a unit of length is desired.
G02-022 – Rock Hardness Tester
G02-022 – Rock Hardness Tester
The Rock Hardness Pick Set is unique, unlike other testing that use minerals or crystal points. These testers are made of metals and alloys of hardness values equal to 2 through 9 on Mohs hardness scale. And because the picks are made of metal, they are easily ground to sharp points which will not break off and which can be easily sharpened.
G02-035 – Crack Width Gauge
G02-035 – Crack Width Gauge
The Crack Width Gauge is a high quality product designed for measuring crack width of rock, concrete and other materials. The high definition microscope is connected to an adjustable light source, which provides a well illuminated image under all working conditions. Measures to the tune of 0.01 mm.
G02-040 – Rock Classification Hammer
G02-040 – Rock Classification Hammer
Rock Classification Hammer is portable and light weight. Cylindrical cores, usually NX sizes are held in a cradle and the hammer mechanism impact induced against the core to obtain rebound value. A series of rebound values say 12 are taken along the length of the core or rock mass to obtain average value for rock classification.
G02-045 – Core Drilling Machine
G02-045 – Core Drilling Machine
The Core Drilling Machine is designed for obtaining core samples from large pieces of rock, or any other materials under observations. The machine works on direct single/three phase AC. Machine has efficient guide rail for easy driving down.
G02-050 – Core cutting machine
G02-050 – Core cutting machine
Core Cutting machine is developed for the preparation of correct shape (and size) of samples. It accepts large variety of samples in any length having a diameter of upto 150mm. Special self adjusted device is provided for griping the sample. This device has easy rotating feeding facility to feed sample on cut. Also provided is water tank and pump, starts automatically on running the motor.
G02-070 – Rock Triaxial Test Apparatus
G02-070 – Rock Triaxial Test Apparatus
Triaxial Test is conducted over variety of Rock samples. Basic system contains a Loading Frame to provide desired strain over sample, Triaxial Cell for keeping the sample and Constant Pressure System for providing constant cell pressure.
G02-080 – Point Load Index Tester
G02-080 – Point Load Index Tester
The Point Load Test Apparatus was originally developed by the Imperial College, London that comprises fixed column loading frame. This is a portable instrument used for the classification of rock by mean of uni-axial compressive force loading over test sample. Also used for the testing of different shapes and sizes such as rock core samples and concrete specimens.
G02-090 – Brazilian Test Apparatus
G02-090 – Brazilian Test Apparatus
The Brazilian Test Apparatus is used for testing rock specimen of upto 100 mm diameter, with a height of half of the diameter. The sample is kept in between two laws and loaded be mean of hand operated hydraulic jack. Load is read over pressure gauge, which has peck load holding facility. Also available is Digital version where load is displayed over clear LCD, having better resolution of 0.1 kN/10 kg.
G02-110 – Slake Durability Test Apparatus
G02-110 – Slake Durability Test Apparatus
This test method has been developed to assess the deterioration of rocks over a period of time when subjected to water immersion. The apparatus consists of a motorized drive unit which is mounted on a baseplate and which can rotate two at a speed of 20 r.p.m. The perforated tank assemblies are filled with water to a level 20 mm below the drum axis.
G02-115 – Portable Rock Shear Box
G02-115 – Portable Rock Shear Box
Rock Shear Box is a simple method for determining the strength and slope stability of rock, in the field and in the laboratory. The equipment consists of a shear box to accept samples not larger than 115×125 mm, or cores up to 102 mm dia. The shear box consists of two halves, the upper being connected to two rams for reversible shearing action and the lower connected to a ram for normal load application.
G02-120 – Lapping and Polishing Machine
G02-120 – Lapping and Polishing Machine
Lapping and Polishing Machine is a bench mounted, single spindle lapping machine, ideally suited for the final polishing of mounted rock or concrete specimens. This is a motor driven unit with 450/500 rpm. A swing-in tap, for continuous water supply during operation is also provided.
G02-125 – Flat Jack Outfit
G02-125 – Flat Jack Outfit
Flat Jacks are normally made of stainless steel plates welded together and used to assess the quality of structures to determine the mechanical properties. The system consists of a single unit of pressurization outlet connected to a coupling complete with couplers and a pressure gauge for displaying the pressure value.
G02-130 – Rockbolt Pullout Test Apparatus
G02-130 – Rockbolt Pullout Test Apparatus
The Rockbolt Pullout Tester is manufactured for conducting anchor pullout test in rock, for the evaluation of bond strength between reinforcement and grout concrete or grout concrete and rock. In this test it is considered that the diameter of the anchor bar or rockbolt in rock, throughout the length of hole is uniform and grout density and quality is also uniform.
G02-150 – Autolevel
G02-150 – Autolevel
Autolevels are used by the Civil Engineers for survey related works and to know the correct level of any location, comparing with known level. In this, a person hold graduated staff and another person find its reading by viewing from Autolevel eyepiece.
G02-160 – Digital Theodlite
G02-160 – Digital Theodlite
Theodolites are used by the Civil Engineers for survey related works and to know the correct level of any place. This is similar to dumpy level or autolevel normally used at road side for road constructions, but this is more accurate as in this system, we can achieve an accuracy of 1 second.
G02-170 – Total Station
G02-170 – Total Station
Total station or TST (total station theodolite) is an electronic/optical instrument used insurveying. The total station is an electronictheodolite (transit) integrated with an electronic distance meter (EDM) to read slope distances from the instrument to a particular point.
G03-050 – Capping Set
G03-050 – Capping Set
Capping set is used to prepare concrete cylinders faces, flat and parallel to other surface, before conducting the compression test. Most of time, trowelled face of concrete cylinder requires face treatment.
G03-060 – Vibrating Table
G03-060 – Vibrating Table
Vibrating Table is used for the proper compaction of concrete test moulds in laboratory. Various sizes of variable frequency vibrating table available for complete compaction of mould.
G03-071 – Longitudinal Compressometer
G03-071 – Longitudinal Compressometer
Longitudinal Compressometer is used for the determination of strain and deformation characteristics of concrete by testing a standard cylindrical mould.
G03-001 – Cement Concrete Mould
G03-001 – Cement Concrete Mould
Different moulds are required as per various standards for specific tests of concrete for compression and flexural tests. The moulds provided by us are accurate in dimensions and also internal finish is smooth. Our mould never deform during casting of concrete specimen.
G03-025 – Slump Test Apparatus
G03-025 – Slump Test Apparatus
Slump Cone Test is done by filling freshly mixed concrete in a standard cone, compacted using tamping rod and drop in height after lifting the cone is measured.
G03-030 – Vee Bee Consistometer
G03-030 – Vee Bee Consistometer
Vee Bee Consistometer is used for the determination of workability of concrete. Concrete is filled in slump cone, placed on a vibration table, and vibration time is noted to achieve complete compaction.
G03-035 – Flow Table
G03-035 – Flow Table
In Flow Test sample is placed on leveled surface and the surface is subjected to continue drops from a fixed height. Increase of concrete base at surface is recorded, meaning more base more flow.
G03-045 – Bulk Density Measure
G03-045 – Bulk Density Measure
Bulk Density of freshly mixed concrete affect durability, strength and resistance to permeability. This test requires Bulk Density Measures of known volume say 5, 10, 15, 20 and 30 liters and tamping rod.
G03-028 – Compaction Factor Test Apparatus
G03-028 – Compaction Factor Test Apparatus
Compaction factor may be defined as the ratio of the weight of partially compacted concrete to the weight of fully compacted concrete, in same mould. Main equipment comprises of two conical hopers having hinged stopper for quick release, allows free fall into mould.
G03-040 – Pocket Penetrometer For Concrete
G03-040 – Pocket Penetrometer For Concrete
Pocket Penetrometer provides quick reference on initial set of freshly laid concrete. In this test, a 32mm2 penetration plunger is pushed 25.4mm deep into concrete and the resistance provided by concrete is measured.
G03-047 – Air Entrainment Meter
G03-047 – Air Entrainment Meter
Entrainment of air in limited percentage improves durability of the concrete and very low air deteriorate it, hence measurement of air entrapped in freshly mixed concrete becomes important. The use of additive chemicals to improve concrete often require check of air entrainment.
G03-073 – Lateral Extensometer
G03-073 – Lateral Extensometer
Lateral Extensometer provides lateral extension of cylindrical mould, while testing them for compression loading.
G03-080 – Length Comparator
G03-080 – Length Comparator
Length Comparator is used for the measurement of change in length, due to change in temperature, of cement or concrete specimen. Usually 250mm effective gauge length moulds are prepared and tested for relative lengths.
G03-085 – Permeability Test Apparatus Concrete
G03-085 – Permeability Test Apparatus Concrete
Concrete is made to resist or restrict the penetration of water into it. In this test a concrete sample is made and placed on test mould. Water at constant pressure is penetrated into mould and passed water is collected and measured for quantity.
G03-100 – Blains Air Permeability Apparatus
G03-100 – Blains Air Permeability Apparatus
Blains Air Permeability Test Apparatus provides fineness of cement. Finer cement passes lesser air and coarser cement means more air. In this test, cement sample is placed inside a constant volume cell, air is passed to balance liquid in manometer and time required to balance liquid is recorded.
G02-170 – Total Station
G03-105 – Vicat Test Apparatus
Vacate Test Apparatus is used to know the water content required in any cement for standard consistency. This apparatus may also provide initial and final setting time of any given cement sample.
G03-110 – Le-Chatellier Mould
G03-110 – Le-Chatellier Mould
Cement and lime usually expand their volume on drying. This should be limited and hence
G03-115 – Le-Chatellier Flask
G03-115 – Le-Chatellier Flask
Le-Chatelier Flask is used for the determination of specific gravity and specific surface area of cement or lime. In this test a 250ml flask having graduation between 18 to 24 ml is used.
G03-135 – Laboratory Mortar Mixer
G03-135 – Laboratory Mortar Mixer
Homogeneity and correct mixing of mortar are the main feature of our Laboratory Mortar Mixer. It is powered by powerful electric that rotate the stainless steel made mixing blade. Bowl capacity is 5 liter.
G03-140 – Vibrating Machine
G03-140 – Vibrating Machine
Vibrating Machine provides correct 12000 cycles and used for efficiently molding 70.6mm cement mortar mould. Secured belt, timer and easy opening/closing are main features.
G03-120 – Cement Autoclave
G03-120 – Cement Autoclave
Autoclave is used to provide high pressure steam for curing any cement specimen, when being tested for change in the length. This is stainless steel chamber capable to providing a constant 21 kg/cm2 pressure, have various safety features.
G03-145 – Jolting Table Apparatus
G03-145 – Jolting Table Apparatus
Jolting Table prepares mortar prism Jolting Mould. This machine has a seating for the prism mould, run on a rotating cam, rotating at 60 rpm.
G03-150 – Tensile Strength Tester
G03-150 – Tensile Strength Tester
Tensile Strength Test is main strength test for cement mortar. In this test a briquette mould is clamped in jaws, pulled at constant rate and achieved load is recorded.
G03-165 – Flexure Testing Machine
G03-165 – Flexure Testing Machine
Flexural Test machine for Mortar prism mould is accurate low strength machine, uses standard 160mm mould on 3 point loading. Load is read over sensitive compression proving ring.
G03-170 – Cement Permeability Apparatus
G03-170 – Cement Permeability Apparatus
Durability of concrete depends mostly on the permeability of cement mortar. We use expensive cement admixtures to increase water proofing of concrete. To check the permeability of Cement Mortar a sample is placed and presurised by water.
G03-300 – Riffle Sample Divider
G03-300 – Riffle Sample Divider
Riffle Sample Dividers are used for quick collection of representative sample from site. Just place sample on hoper and only required size passes through slots. Passed sample is collected directly in to pans.
G03-305 – Thickness Gauge
G03-305 – Thickness Gauge
Flakiness Index Gauge or Thickness Gauge is used to measure thickness of aggregate as large size aggregate may lower the workability and also affect the durability of the concrete.
G03-200 – Compression Testing Machine
G03-200 – Compression Testing Machine
Main feature of any material is its strength against compression. This is most common test done on most materials at site, when testing the prepared moulds against compression force. We make upto 5000 kN compression machine, providing stable loading.
G03-307 – Length Gauge
G03-307 – Length Gauge
Elongation Index Gauge or Length Gauge is used to measure length of aggregate as bigger size aggregate may lower the workability and also affect the durability of the concrete.
G03-310 – Density Basket
G03-310 – Density Basket
Density of any materials is expressed in gm/m3 is the numerical value equals to specific gravity. Density basket having 20 cm dia and 20 cm height is used as standard measure for ascertaining the density of any test sample.
G03-315 – Cylindrical Metal Measure
G03-315 – Cylindrical Metal Measure
Cylindrical Metal Measures are used for the measurement of bulk density of aggregates, which depending on the angularity or absence of rounding. Standard set of 3, 15 and 30 liter metal containers with handles are provided with tamping rod.
G03-320 – Aggregate Crushing Value Apparatus
G03-320 – Aggregate Crushing Value Apparatus
Aggregate Crushing Value Test is conducted on properly compacted fixed amount of aggregate sample and giving fixed load at fixed rate. Crushed sample is sieved, meaning less crushing more strength.
G03-325 – Aggregate Impact Value Test
G03-325 – Aggregate Impact Value Test
Aggregate Impact Value Test is conducted to determine the impact value of aggregate and also to ascertain their stability in road construction. In this test, sample is placed in test cup and subjected to 380mm hammer impact.
G03-330 – Los Angles Abrasion Test Machine
G03-330 – Los Angles Abrasion Test Machine
Resistance to wear against abrasion is main parameter we check in aggregates. In this test, test sample is placed inside 75cm drum and rotated alongwith 12 nos. 48mm diameter abrasive charge.
G03-335 – Dorry Abrasion Test Machine
G03-335 – Dorry Abrasion Test Machine
Dorry Abrasion Test is used for checking the aggregate against loss in abrasion. Test is conducted by placing the sample on a disc, rotating at 30 rpm. Initial weight of sample and final weight will determine abrasion.
G03-337 – Deval Abrasion Test Machine
G03-337 – Deval Abrasion Test Machine
Deval Abrasion Machine gives resistance to abrasion. Machine has two inclined drum, having abrasive charge, rotating at 30 rpm.
G03-350 – Sand Absorption Cone
G03-350 – Sand Absorption Cone
Sand Absorption Cone is used for the determination of specific gravity and water absorption of aggregates. Main equipment comprise of a cone having 40mm dia at top and 90mm dia at base and a tamping bar of 25mm dia face.
G03-370 – Tile Abrasion Testing Machine
G03-370 – Tile Abrasion Testing Machine
Tile Abrasion Testing Machine is used for the testing of concrete tiles for loss against abrasion. This is an important feature in commercial and industrial establishments. In this test, 70mm tile is placed under abrasion powder, on a rotating disc, and abrasion is measured.
G03-372 – Tile Impact Test
G03-372 – Tile Impact Test
Tile Impact Test is an important test, to check the tile strength against fall of objects. We provide different type of machines for different tile and different standards.
G03-400 – laboratory Jaw Crusher
G03-400 – laboratory Jaw Crusher
Laboratory Jaw Crusher is used for crushing coarse materials (<6mm) in to fine material. Manganese steel jaws, adjustable belts tension, efficient air cooled motor are main feature of our machine.
G03-410 – Laboratory Pulveriser
G03-410 – Laboratory Pulveriser
Laboratory Pulveriser is used for grinding fine materials into fine mesh. In this machine, rotating discs having planetary movement in vertical plane can crush 450 gm materials into 100 mesh in one run of 1 minute.
G03-412 – Laboratory Ball Mill
G03-412 – Laboratory Ball Mill
Laboratory Ball Mill is mainly used in cement industry for grinding pigments. Sample and grinding media, rotated together in closed steel drum for specific period. A 4 digit revolution counter may also be provided recording the revolution.
G03-415 – Laboratory Concrete Mixer
G03-415 – Laboratory Concrete Mixer
Quality concrete requires efficient mixing of concrete. Basic object of mixing is to coat aggregate surface with cement paste and bring the mixture in uniform condition. We provide laboratory mixers for small amount of concrete mixing in laboratory.
G03-417 – Laboratory Concrete Mixer Pan Type
G03-417 – Laboratory Concrete Mixer Pan Type
In modern days complete mixing with small amount of materials is done using this Pan Mixer. Here mixing blade remains in position while pan is moved by gear based motor. Tilting based design makes unloading easy.
G03-430 – Buoyancy Balance
G03-430 – Buoyancy Balance
Density of any materials is expressed in gm/m3 is the numerical value equals to specific gravity. The Buoyancy balance provided by us is quick mean of observing density of aggregate or hardened concrete such as cubes.
G03-500 – Concrete Test Hammer
G03-500 – Concrete Test Hammer
The Concrete Test Hammer is a hand held instrument used for testing the quality of hardened concrete. On new structure, the instrument can be used to give an indication of the gain in concrete strength, while on existing structures, it can be used to gain an estimate of the uniformity of the concrete. The instrument works on the principle that the rebound of an elastic mass impacting on a surface is a function of the hardness of the structures itself. Harder the surface, the greater is the rebound distance.
G03-510 – Ultrasonic PV Concrete Tester
G03-510 – Ultrasonic PV Concrete Tester
Ultrasonic Pulse Velocity Concrete Tester is used for the determination of faults, voids, crack etc. in-situ or on precast concrete and for long-term monitoring of structures subject to environmental conditions. This gives data concerning the homogeneity of the concrete, by generating pulse of sound into the concrete and measuring the time taken by the sound wave to travel from the transmitter to receiver probe through the materials.
G03-520 – Concrete Cover Meter/Rebar Locator
G03-520 – Concrete Cover Meter/Rebar Locator
The Microprocessor based device Cover Meter is intended to define position, depth and size of the reinforcement bars using a probe. The probe searches using a version of “pulse induction” techniques proved to give more accurate results in areas of bar congestion. When the instrument selects the bar size accurately, then precise depths can be displayed.
G03-525 – Crack Width Microscope
G03-525 – Crack Width Microscope
The Crack Width Microscope is a high quality product designed for measuring crack width both in concrete and other materials. The high definition microscope is connected to an adjustable light source, which provides a well illuminated image under all working conditions and a scale with a least count of 0.01 mm gives base values.
G03-530 – Demountable Mechanical Strain Gauge
G03-530 – Demountable Mechanical Strain Gauge
Demountable Mechanical Strain Gauge, popularly known as DEMEC was developed at the CC-UK to enable strain measurements to be made at different parts of a structure using a single instrument. The DEMEC consists of a dial gauge attached to a steel bar.
G03-532 – Concrete Corrosion Monitor
G03-532 – Concrete Corrosion Monitor
A fixed conical point is mounted at one end of the bar, and a moving conical point is mounted on a knife edge pivot at the opposite end. The pivoting movement of this second conical point is measured by the indicator. The expansion of the corrosion (iron oxides) ofcarbon steel reinforcement may induce mechanical stress that can cause the formation of cracks and disrupt the concrete structure. If the rebars have been poorly installed and are located too close to the concrete surface in contact with the air, concrete may be detached from the concrete mass by the rebars corrosion and may fall down. To measure corrosion we have corrosion monitor.
G04-040 – Ring And Ball Apparatus
G04-040 – Ring And Ball Apparatus
Ring and Ball Apparatus is used to determine that specific temperature when a steel ball having 9.5mm dia passes specified distance when heated at specific conditions.
G04-098 – Ford Cup
G04-098 – Ford Cup
Flow Cup, Ford Cup or B4 type cup is simple test done on petroleum products to know the apparent viscosity for control of consistency. It has a fixed diameter orifice through which samples passes and time taken in above process is recorded.
G04-099 – Standard Tar Viscometer
G04-099 – Standard Tar Viscometer
Standard Tar Viscometer is used for determining the viscosity of cutback bitumen or road oil. Sample is heated and let it pass through fix diameter orifice…. time to flow sample is measured.
G04-001 – Flash and Fire Point
G04-001 – Flash and Fire Point
Flash and Fire Point Apparatus is used for finding the flash and fire point of petroleum products. Test product is heated on heater and flame is introduced to its vapor. Temperature when vapor catches flash or fire is noted.
G04-030 – Redwood Viscometer
G04-030 – Redwood Viscometer
Redwood Viscometer is used for the determination of viscosity all oils and expressed in redwood seconds. In this test, sample is heated and time taken in 50ml through drop through an orifice is measured.
G04-035 – Saybolt Viscometer
G04-035 – Saybolt Viscometer
Saybolt Viscometer determine saybolt viscosity at varying temperature. In this test, sample is heated in a water bath, and time taken in collection of sample through drop is measured.
G04-020 – Standard Bitumen Penetrometer
G04-020 – Standard Bitumen Penetrometer
Standard Bitumen Penetrometer may be used for the penetration test on variety of materials such s grease, bitumen, asphalt etc. in this test a sample is placed in a test cup and a needle or cone is dropped and penetration is measured.
G04-045 – Ductility Test Apparatus
G04-045 – Ductility Test Apparatus
Ductility is the cohesive strength of any binder like bitumen, and defined as distance in centimeters to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a fixed rate at a temperature of 250 or 27 0C.
G04-050 – Film Stripping Value Apparatus
G04-050 – Film Stripping Value Apparatus
Film Stripping Value Test Apparatus is used for the determination of stripping value of bituminous mixed of fine aggregates of size 1 mm to 75 micron. Main apparatus consists of a tray rotates in vertical plane. Sample bottles are mounted on this circular tray with their mouth towards centre of the tray. A time switch is provided for automatic cut-off.
G04-055 – Benkelman Beam
G04-055 – Benkelman Beam
This Benkleman Beam was developed by the US Bureau of Public Roads, for the measurement of deflection in flexible road pavements. This instrument is made from aluminum for making it lightweight and supplied in telescopic design for ease in transportation and assembled at site easily with the help of provided screws.
G04-062 – Automatic Road Roughness Recorder
G04-062 – Automatic Road Roughness Recorder
The Road Roughness Recorder or Bump Integrator is specially developed for the measurement, marking and recording of road irregularities including unevenness of any road, runway and pavement constructed with bitumen or cement concrete. Basic principal of the measurement is similar to a straight edge wherein irregularities are measured over length.
G04-065 – Centrifuge Extractor
G04-065 – Centrifuge Extractor
Centrifuge Extractor is used for the determination and checking of bitumen percentage in bitumen mixes. The mix is added with a solvent and dissolved bitumen is removed by centrifuge action. Equipment is provided complete with removable aluminum rotor bowl, with suitable cup and tightening nuts.
G04-070 – Marshall Test Apparatus
G04-070 – Marshall Test Apparatus
Originally Marshall Stability Test was developed by an American Engineer Dr. Bruce Marshall for the tests on hot mix design having aggregate size upto 25 mm. This test is conducted when a loading is done at 50 mm per minute at the constant test temperature of 600C.
G05-040 – Reference Stud for Survey
G05-040 – Reference Stud for Survey
Total Structural Settlement may be measured using these Reference Studs. These Studs are normally installed on the top of structures and level is measured using any survey equipment.
G05-045 – Topographic Survey Markers
G05-045 – Topographic Survey Markers
Topographic Markers are normally installed on the face of the structure for relative movement/settlement measurement. An electronic survey equipment such as total station may be used for position of the markers.
G05-130 – Joint Meter
G05-130 – Joint Meter
Joint Meter is used for the measurement of 3D position of any joints including dam blocks. This is simple device read manually or remotely, but provides movement in x-y-z directions.
G05-001 – Casagrande Piezometer
G05-001 – Casagrande Piezometer
Casargande Piezometers are mainly a filter element installed in the earth or earth fill structures for finding the piezometric or pore pressure may be for stability of dams, ground improvement, seepage or water level or for any other purposes.
G05-010 – Water Level Indicator Electronic
G05-010 – Water Level Indicator Electronic
Water Level Indicator measures water level inside casagrande piezometer, bore well or open well. Main equipment has a cable on cable reel marked at fixed interval and a sounder providing audio and visual signal on probe water contact.
G05-030 – Vibrating Wire Piezometer
G05-030 – Vibrating Wire Piezometer
Vibrating Wire technique is a relatively new technique having good accuracy and longitivity. Main feature of this technique that the signal transmission is by frequency and not by current as done in other electrical instrument, making it good for long cable length or addition of cable length in future.
G05-050 – Digital Inclinometer
G05-050 – Digital Inclinometer
Inclinometer is a sensitive sensors providing deflection in between pairs of wheels, spaced at 500 mm apart. The sensor may be biaxial servo accelerometer based or vibrating wire or electrolytic sensor, provide deflection readings over Digital Indicator. When we insert Inclinometer probe into properly grouted casing, measurement of lateral movement or earth and structures is found.
G05-060 – Pendulum
G05-060 – Pendulum
The Pendulums are installed to monitor the deflection in the dam body or in the whole dam. These are extremely accurate and reliable, as there very few moving parts. Movement can be easily monitored by measuring distances of the structures relative to the pendulum wire clamped either at top of dam or at foundation.
G05-090 – Borehole Extensometer
G05-090 – Borehole Extensometer
Borehole extensometer could be single point or multipoint extensometer, used for the stability and movement behavior of soil and rock masses. Basic device has an anchor connected to a steel rod and grouted at the fault or measurement location. Grouted anchor moves with fault and hence movement measured at surface, using depth measuring device.
G05-176 – Water Level Recorder
G05-176 – Water Level Recorder
Water Level Recorder for Dams provides accurate data on water level from any river, pond, lake, reservoir, borehole, ranging from natural to man made structures. This is automatic system for unmanned recording of water level avoiding travel to field and take measurements. Another important feature is ceramic transmitter for longer life and strong graphical software for daily or monthly data presentation in graphical format.
G05-190 – Strong Motion Tri-axial Accelerometer
G05-190 – Strong Motion Tri-axial Accelerometer
This Tri-axial Acceleration Recorder has large range with high resolution. Sensor uses analogue to digital output converter and suitable for interfacing to any microcontroller as it is low profile capacitive MEMS sensor.
G06-090 – Cup Anemometer
G06-090 – Cup Anemometer
Anemometer or Wind Speed Recorder is a simple mechanical device used for the measurement of wind speed directly in kilometers. This is must have device for all meteorological observation stations using weather conditions.
G06-096 – Wind Vane
G06-096 – Wind Vane
Wind Vane is used for the observations of wind direction and installed at almost all meteorological observation stations. Main equipment comprises a friction less wind vane, always facing the direction of wind flow, indicating wind direction.
G06-001 – Non-Recording Rain Gauge
G06-001 – Non-Recording Rain Gauge
Non Recording or Ordinary Rain Gauge provides daily measurement of rainfall. It has standard area opening covered with gunmetal rim, through which rain pour and collected into collection bottle. Rain water is then transferred into rain measuring cylinder and recorded, directly in mm rainfall.
G06-015 – Digital Recording Tipping Bucket Rain Gauge
G06-015 – Digital Recording Tipping Bucket Rain Gauge
Combine the advantage of Datalogger with a tipping bucket rain gauge to get this fully self-contained field instrument. Automatically measures 200 cm of rainfall data to determine rainfall rates, times, and duration. A time stamp is stored for each tip event for detailed analyses. Self-emptying for continues rainfall logging.
G06-025 – Water Current Meter
G06-025 – Water Current Meter
A Current Meter is designed for the measurement of flow velocity in fresh, salt or effluent water. The Current Meter may be used with cable suspension bridge or using wading rod. Standard current meter is good for normal flow while propeller current meter may be used for high flow conditions.
G06-050 – Digital Flow Meter
G06-050 – Digital Flow Meter
Developed for use under various challenging field conditions. Its different impellers measure almost any fluid or liquid. Fluid measurements are taken in m/s To take flow measurements from a bridge or other elevated location, use the flow sensor with 15 meter cable. Kit includes the display, 2m telescoping rod, a 60mm water impeller and carrying case.
G06-075 – Automatic Water Level Recorder
G06-075 – Automatic Water Level Recorder
Water Level Recording System provides high resolution data to the resolution of 3 mm in 10 meter sensor range. Both the recorder and sensor are included in one encapsulated housing, installed inside borehole or pipe. To achieve maximum accuracy sensor is vented to atmosphere. This data recorder uses a very tough nylon tubing to vent the sensor to atmospheric pressure. The top of the tube has a suspension and vent opening unit.
G06-092 – Wind Speed Indicator
G06-092 – Wind Speed Indicator
Wind Speed Indicator has multifunctional measurement capabilities of m/s, km/h, f/mn, and knots. The display is easy to read produces fast accurate reading with a data hold function. It also has the added advantage of a separate remote sensor, if required.
G06-100 – Stevension Screen
G06-100 – Stevension Screen
Stevension Screen is a simple mechanical device used for the effective ventilation for the observation of almost all the meteorological measuring equipment. Most common products kept inside the screen are thermometer, barometer and hygrometer etc. The unit has easy opening and closing and kept over good height for easy viewing.
G06-120 – Sun Shine Recorder
G06-120 – Sun Shine Recorder
Sunshine recorder sphere is made of colorless annealed optical glass and is clamped precociously across its diameter. Recording cards made from a special board and marked in hourly interval provides a clearly visible trace of the suns rays focused by the sphere, when the sun is obscured the trace, less gaps, is proportional to the duration of sunshine. Different cards are available for different latitudes. Complete with one year supply of cads.
G06-124 – Snow Gauge
G06-124 – Snow Gauge
The Snow Gauge is installed for the measurement of snow fall. This is straight engraved stick of 1 meter, clamped to a plate having hole for permanent installation at measurement locations. Snow fall in the area will be measured directly in cm snow fall.
G06-125 – Open Pan Evaporimeter
G06-125 – Open Pan Evaporimeter
Open Pan Evaporimeter is a simple mechanical device used for the measurement of evaporation in open air and manufactured as per the guidance provided in the Standards. The equipment is kept in the open and water evaporated is recorded, daily at convenient time, using calibrated measuring cylinder
G06-140 – Hygrograph
G06-140 – Hygrograph
Hygrograph is housed inside strong cabinet provides accurate measurement of temperature data over time. “AA” battery operates quartz movement and is more accurate than key wound movements. Temperature readings are marked with a felt tip pen easily available with all scientific dealers. Equipment is provided ready to use with a one year charts, AA battery and one felt tip pen.
G06-150 – Barograph
G06-150 – Barograph
Barograph is housed in a case with glass sides and a polished handle for easy access. The single “AA” battery operated quartz movement requires no winding and is more accurate than key wound movements. The barograph readings are marked with a felt tip pen that lasts 6-9 months. It is furnished with a one-year supply of weekly charts, AA battery and one felt tip pen.
G06-160 – Automatic Weather Monitoring Station
G06-160 – Automatic Weather Monitoring Station
This is a fully configured, digital, self contained system, fitted on a stand, and inside weather proof enclosure with maintenance free batteries. All Sensors are powered from data logger, doesn’t require external power source. Standard equipment includes sensors for Air Temperature and Humidity, Wind Speed and Direction, Rainfall and Barometric Pressure.
G06-185 – Sediment Sampler
G06-185 – Sediment Sampler
Sediment Sample is a depth integrated sampler collect representative sample from specific depth. Simply lower this at sampling depth, on reaching the spot, pull trip line, sample bottle will begin filling. During filling, decreasing pressure will prevent exchange of air and water with sample. We also provide mechanical lowering device equipped with cable reel, stand and extended arm for cantilever type uses. Easy handling make this sediment sampler suitable for almost all applications.
G06-200 – Cableway readymade
G06-200 – Cableway readymade
Cableway is used mainly for the measurement of river flow using current meter. It is operated from the bank hence the cableway system provides a safe and effective method to acquire stream flow and sediment data year-round. The hand-operated cableway is a safe alternative to manned cable cars at sites not easily gauged by boat or bridges during high flows.
G10-165 – Hot Plate Thermostatic
G10-165 – Hot Plate Thermostatic
A hot plate is a portable self-contained tabletop small appliance that has a tehrmostat for temperature controlling and electric heating elements for heating. The heating surface is plane smooth for keeping heating object on it.
G10-380 – Vacuum Pump
G10-380 – Vacuum Pump
A vacuum pump is a device that removes gas particles from a sealed volume in order to leave behind a partial vacuum. We provide conventional as well as oil free vacuum pumps, and all our pumps are easy to use and handle.
G10-090 – Sieve Shaker
G10-090 – Sieve Shaker
Sieve Shaker is mechanical mean for shaking sieves. Various sieve shaker available including most common gyratory, rotap, vibratory and manual.
G10-100 – Proving Ring
G10-100 – Proving Ring
Proving rings are made of special spring steel and used for compression load measurement, using a metal ring, the movement of which is measured with a precision dial indicator. Generally we maintain a load measuring range from 100 kg to 300T.
G10-167 – Water Bath
G10-167 – Water Bath
Water bath is a double walled insulation filled closed water container having electrical heating element. A thermostatic temperature controller is provided to maintain desired temperature inside bath.
G10-255 – Enamel Tray
G10-255 – Enamel Tray
Enamel Tray is a simple tray made from steel having ceramic enamel coating for long life. Various sizes from 200mm to 600 available as per laboratory requirement.
G10-310 – Digital Thermometer
G10-310 – Digital Thermometer
Digital Thermometer is used for the measurement of accurate temperature of any object. Unlike mercury thermometer, these are easy to read and provide accurate results.
G10-335 – Dial Indicator
G10-335 – Dial Indicator
Dial indicator is used for movement measurement. These Indicators are tried and tested for years. Normal measurement least count is 0.01 mm, but 0.001 mm dial indicators available with us.
G10-001 – Sieve
G10-001 – Sieve
Sieves are required for sieve analysis or gradation test to assess the particle size distribution of a granular material. The size distribution is often of critical importance to the way the material performs in use. A sieve analysis can be performed on any type granular materials including sands, crushed rock, clays, granite, feldspars, coal, soil, powders, grain and seeds.
G10-140 – Drying Oven
G10-140 – Drying Oven
Hot air ovens are electrical devices, use dry heat to dry any materials. Generally, they can be operated from 50 to 300 °C. A thermostat or digital temperature controls the temperature. Their double walled insulation keeps the heat in and conserves energy, the inner layer being a poor conductor and outer layer being metallic. These are fitted with the adjustable wire mesh trays as well as indicators and controls for temperature and holding time.
G10-158 – Humidity Chamber
G10-158 – Humidity Chamber
Humidity chamber is an enclosure used to test the effects of specified environmental conditions on materials and components. A chamber artificially replicates the conditions under which materials, devices or components might be exposed. It is also used to accelerate the effects of exposure to the environment, sometimes at conditions not actually expected.
G10-160 – Muffle Furnace
G10-160 – Muffle Furnace
Muffle furnace is a closed chamber in which a material is kept and heated to test under very high temperature. This is primarily an electrical device, where heating elements, heat the sample in closed chamber. Temperature control is done, using thermostat or digital controller.
G10-175 – Water distillation apparatus
G10-175 – Water distillation apparatus
Water Distillation is a process of separating the component substances from water by selective vaporization and condensation. Distillation may result in essentially complete separation, nearly pure components, or it may be a partial separation that increases the concentration of selected components of the water.
G10-185 – Measuring Cylinder
G10-185 – Measuring Cylinder
Measuring Cylinder, Graduated Cylinder or Mixing Cylinder is a laboratory equipment used to measure the volume of a liquid. These cylinders are generally more accurate and precise thanlaboratory flasks and beakers. These cylinders are sometimes used to indirectly measure the volume of a solid by measuring the displacement of a liquid.
G10-225 – Digital Weighing Balance
G10-225 – Digital Weighing Balance
Weighing scales or weighing machine is ameasuring instrument for determining theweight or mass of an object. Weighing scales are used in many industrial and commercial applications, and products. Specialized weighing balances are available for 100gm, 1 gm, 0.01 g,, and 0.001 gm least count.
G10-355 – Speedy or Rapid moisture meter
G10-355 – Speedy or Rapid moisture meter
Speedy or Rapid Moisture Meters are used to measure the percentage of water in a given soil or powdery material. In this method calcium carbide regent react with the water content of the sample and produces acetylene and calcium hydroxide. The gas generate pressure on the closed chamber and display this pressure in form of moisture over calibrate pressure gauge.
G10-360 – Infrared Temperature Meter
G10-360 – Infrared Temperature Meter
Infrared Temperature Meter is a non contact technique to measure temperature of any surface. This is sometimes very useful where our hand can’t reach, such as brick kiln or inside furnace. Easy to use, just press the switch and get the temperature in desired engineering form.